Wallbox Pulsar Plus / Pulsar Max / Commander 2 / Pulsar Pro
EV chargers Supported
What Franzl can do with this device
| Measure live power | ✓ |
| Meter energy (kWh) | ✓ |
| Read state of charge (SoC) | ✓ |
| Control power | ✓ |
| Control operating mode | ✓ |
| Switch phases (1↔3-phase) | — |
How it connects
Franzl reads this device through the Home Assistant integration wallbox. If your device is already set up there, Franzl finds it automatically.
Setup
The wallbox is connected through the Home Assistant integration wallbox: it connects to your myWallbox account in the cloud, not locally. Alternatively, OCPP can be enabled; that disconnects the wallbox from the myWallbox cloud, though. You can't use both at once.
Requirements
- myWallbox account (email + password), two-factor authentication disabled
- For the OCPP route: "OCPP" and "Improved charger control" enabled in the myWallbox app, firmware ≥ 5.x
Device fits? Then nothing stands between you and getting started.
Install Franzl