SMA EV Charger Business
EV chargers Supported Control prepared
This device's interface is documented by the manufacturer and captured in the profile. The driver for it is not built yet. Franzl reads the device and includes it in the optimisation, but cannot control it yet.
What Franzl can do with this device
| Measure live power | ✓ |
| Meter energy (kWh) | ✓ |
| Read state of charge (SoC) | — |
| Control power | — |
| Control operating mode | — |
| Switch phases (1↔3-phase) | — |
How it connects
Franzl connects to the device directly and locally: via its IP address in your home network, no cloud detour.
Setup
The Business wallbox is connected via a local Modbus TCP connection to its built-in Bender CC613 controller.
Requirements
- In the wallbox's web interface, set the register set to "Ebee/Bender/MENNEKES" (not Phoenix/TQ-DM100)
- Enable "Allow UID Disclose" in the settings
What you enter
- IP address of the wallbox: Required
- Unit ID: optional
Default:
255
Device fits? Then nothing stands between you and getting started.
Install Franzl