Nibe S-Series (S1155/S1255/S2125/S320/S325/S735/SMO S40 …)
Heat pumps Hot water Fully supported
What Franzl can do with this device
| Measure live power | ✓ |
| Meter energy (kWh) | ✓ |
| Read state of charge (SoC) | — |
| Read temperature | ✓ |
| Control power | — |
| Control operating mode | ✓ |
| Set target temperature | — |
How it connects
Franzl reads this device through the Home Assistant integration nibe_heatpump. If your device is already set up there, Franzl finds it automatically.
Setup
Activate Modbus TCP on the main control panel under menu 7.5.9. For PV power limit (register 6007): firmware ≥ 4.7.5 is required.
Prerequisites
- Menu 7.5.9: Modbus TCP activated
- For PV power limit: firmware ≥ 4.7.5
What you enter
- IP address: Required
Example:
192.168.1.91 - Unit ID: optional
Default:
1 - Firmware ≥ 4.7.5 (power limit possible)?: optional
Default:
yes
Device fits? Then nothing stands between you and getting started.
Install Franzl