Mennekes AMTRON Compact 2.0s / 4You 300 / Kostal Enector
EV chargers Fully supported Control being verified
The control path for this device is implemented, but not yet verified end-to-end on real hardware. Reading and display are unaffected.
What Franzl can do with this device
| Measure live power | ✓ |
| Meter energy (kWh) | ✓ |
| Read state of charge (SoC) | — |
| Control power | ✓ |
| Control operating mode | ✓ |
| Switch phases (1↔3-phase) | ✓ |
How it connects
Franzl connects to the device directly and locally: via its IP address in your home network, no cloud detour.
Setup
Configure the wallbox as a Modbus TCP slave. Set the DIP switch on the Phoenix Contact controller to slave mode.
Prerequisites
- DIP switch set to slave
- Modbus TCP activated
What you enter
- IP address: Required
Example:
192.168.1.50 - Port: optional
Default:
502 - Slave ID: Required
Default:
50
Device fits? Then nothing stands between you and getting started.
Install Franzl