KEBA KeContact P30 c-series

EV chargers Fully supported

What Franzl can do with this device

Measure live power	✓
Meter energy (kWh)	✓
Read state of charge (SoC)	—
Control power	✓
Control operating mode	✓
Switch phases (1↔3-phase)	—

How it connects

Franzl connects to the device directly and locally: via its IP address in your home network, no cloud detour.

Setup

Activate the UDP Smart Home interface (DIP switch 1.3 to ON, then restart the wallbox). The Franzl Gateway then talks to the P30 directly over UDP port 7090.

Prerequisites

DIP switch 1.3 (UDP/Smart Home interface) set to ON
Wallbox restarted after switching
Static IP for the wallbox recommended

What you enter

KEBA P30 IP address: Required Example: 192.168.1.45
UDP port: optional Default: 7090

Device fits? Then nothing stands between you and getting started.

Install Franzl