IDM Aero ALM / Terra ML (Navigator 2.0)
Heat pumps Hot water Fully supported
What Franzl can do with this device
| Measure live power | ✓ |
| Meter energy (kWh) | ✓ |
| Read state of charge (SoC) | — |
| Read temperature | ✓ |
| Control power | ✓ |
| Control operating mode | — |
| Set target temperature | ✓ |
How it connects
Franzl uses the Home Assistant custom integration idm_heatpump (installable via HACS). If your device is set up there, Franzl finds it automatically.
Setup
Activate Modbus TCP in the Navigator 2.0 web interface under Settings → Interfaces. Navigator 1.x is not supported.
Prerequisites
- Navigator 2.0 controller (not Navigator 1.x)
- Modbus TCP activated in the web interface
What you enter
- Navigator IP address: Required
Example:
192.168.1.90 - Port: optional
Default:
502 - Unit ID: optional
Default:
1
Device fits? Then nothing stands between you and getting started.
Install Franzl