Hardy Barth (echarge) cPH1 (eCB1)
EV chargers Basic support Control prepared
This device's interface is documented by the manufacturer and captured in the profile. The driver for it is not built yet. Franzl reads the device and includes it in the optimisation, but cannot control it yet.
What Franzl can do with this device
| Measure live power | ✓ |
| Meter energy (kWh) | ✓ |
| Read state of charge (SoC) | — |
| Control power | — |
| Control operating mode | — |
| Switch phases (1↔3-phase) | — |
How it connects
Franzl connects to the device directly and locally: via its IP address in your home network, no cloud detour.
Setup
Franzl connects directly to your wallbox's eCB1 REST API via its local IP address; a Home Assistant integration is not needed for this.
Requirements
- The eCB1 must be in "manual" operating mode, otherwise the wallbox's internal solar logic keeps regulating in parallel
What you enter
- eCB1 IP address: required
Device fits? Then nothing stands between you and getting started.
Install Franzl