go-e Charger Gemini / Flex 2.0
EV chargers Fully supported
What Franzl can do with this device
| Measure live power | ✓ |
| Meter energy (kWh) | ✓ |
| Read state of charge (SoC) | — |
| Control power | ✓ |
| Control operating mode | ✓ |
| Switch phases (1↔3-phase) | ✓ |
How it connects
Franzl reads this device through the Home Assistant integration goecharger. If your device is already set up there, Franzl finds it automatically.
Setup
Activate the local HTTP API v2 in the go-e app (Internet → Advanced Settings → Local HTTP API v2). Enter the charger's IP address here.
Prerequisites
- Local HTTP API v2 activated in the go-e app
- Charger on the same network as the Franzl Gateway
What you enter
- go-e Charger IP address: Required
Example:
192.168.1.40 - API key (optional): optional Only needed if an API key is set in the go-e app
Device fits? Then nothing stands between you and getting started.
Install Franzl