Autel MaxiCharger AC / AC Compact
EV chargers Supported
What Franzl can do with this device
| Measure live power | ✓ |
| Meter energy (kWh) | ✓ |
| Read state of charge (SoC) | — |
| Control power | ✓ |
| Control operating mode | ✓ |
How it connects
Franzl connects to the device directly and locally: via its IP address in your home network, no cloud detour.
Setup
Control runs exclusively over OCPP 1.6J against the OCPP server built into the Franzl Gateway, because the wallbox has no usable local Modbus.
Prerequisites
- In the Autel Charge app, enter your Franzl Gateway's address under "Custom"
- The charger ID matches the serial number if you leave the field empty
- Firmware at least charge control unit V1.51.00 and power control module V1.19.00 (older firmware ignores current setpoints)
Device fits? Then nothing stands between you and getting started.
Install Franzl