ABL eMH1
EV chargers Basic support Control prepared
This device's interface is documented by the manufacturer and captured in the profile. The driver for it is not built yet. Franzl can neither read nor control this device today.
What Franzl can do with this device
| Measure live power | — |
| Meter energy (kWh) | — |
| Read state of charge (SoC) | — |
| Control power | — |
| Control operating mode | — |
| Switch phases (1↔3-phase) | — |
How it connects
Franzl connects to the device directly and locally: via its IP address in your home network, no cloud detour.
Setup
The eMH1 has no network Modbus (it speaks Modbus ASCII over its serial interface), so the connection runs through an RS485-to-TCP adapter.
Prerequisites
- An RS485-to-TCP adapter (e.g. Protoss PE-11-H), wired to the wallbox's CONTROL connector
Device fits? Then nothing stands between you and getting started.
Install Franzl