ABL eM4 Twin / eM4 Single
EV chargers Fully supported
What Franzl can do with this device
| Measure live power | ✓ |
| Meter energy (kWh) | ✓ |
| Read state of charge (SoC) | — |
| Control power | ✓ |
| Control operating mode | ✓ |
| Switch phases (1↔3-phase) | — |
How it connects
Franzl connects to the device directly and locally: via its IP address in your home network, no cloud detour.
Setup
Modbus TCP is active by default on eM4 models (port 502, slave 255). For Twin connections: select connector 1 or 2 for this wallbox instance.
Prerequisites
- eM4 connected to the network
What you enter
- IP address: Required
Example:
192.168.1.55 - Slave ID: optional
Default:
255 - Connector (1 or 2): Required
Only relevant for eM4 Twin
Default:
1
Device fits? Then nothing stands between you and getting started.
Install Franzl